Scenario 01
1 thermostat
Up to 1 hour
$159max
$159 first hour
Book thisComfort & Security · San Diego, CA
Smart Thermostat Installation in San Diego Nest, Ecobee, Honeywell & more.
Thermostats, wireless or conventional, are part of our comfort work. We swap your old thermostat, sort out the wiring and C-wire, and set up the app and schedule.
- $159
- First hour included
- ~1 hr
- Typical job time
- 5.0
- Google rating
Typical time
~1 hr
- Service call $159
- Then per 15 min $39.75
The short answer
How much does smart thermostat installation cost in San Diego?
Switch Your Fixture installs wireless and conventional thermostats in San Diego homes, including Google Nest, Ecobee and Honeywell smart thermostats. A thermostat is about an hour or less on our estimator, so it is usually covered by the $159 service call that includes the first hour. We label and connect the wiring, add a C-wire adapter if needed, and set up the app.
Bought the wrong size? Only a 15-minute consultation fee, and we rebook.
- Service
- Thermostats
- Category
- Comfort & Security
- Typical time
- About 1 hour or less
- Service call
- $159 · first hour
- After the first hour
- $39.75 per 15 min
- Warranty
- Every installation
- Payment
- Cash, check, card, Zelle or Venmo
At a glance
What’s included in smart thermostat installation
Every install, step by step.
Every visit follows the same checklist, so nothing gets skipped and you know exactly what you’re paying for.
- 01
Old thermostat removed and wires labeled
- 02
New base plate mounted level
- 03
Wiring connected, C-wire adapter if needed
- 04
System type and heat/cool tested
- 05
Wi-Fi and app setup
- 06
Trim plate to cover the old footprint, if needed
Thermostats cost in San Diego
What will it cost?
Thermostats are about 1 hour or less.
Planning estimates from our published rate. Your bill follows the real time on site in 15-minute increments, and if a fixture doesn’t fit you only pay a 15-minute consultation fee.
Types of thermostats we install
Every style, every brand.
Swipe
About 1 hour or lesstypical job time
Why San Diego chooses us
Thermostats, done right the first time.
- About an hour or less
- C-wire issues handled
- App and schedule set up for you
- Add smoke alarms or switches on the same visit
How long does it take?
Thermostats are about 1 hour or less.
5.0 on Google
“Switch Your Fixture has performed many projects for us throughout the years. Their work is top notch. The team is professional and the prices are very reasonable. We highly recommend them!”
AM
Angela M
Google review · Repeat customer
I will call them again
“I am happy with the work they performed and recommend their services for your home needs. I will definitely call on them again in the future. Great job guys!”
Thermostats FAQ
Smart Thermostat Installation questions, answered.
Straight answers about smart thermostat installation in San Diego.
Do I need a C-wire for a smart thermostat?
Most smart thermostats work best with one. If your system doesn’t have a C-wire, we can usually install the adapter that comes with the thermostat.
How much does thermostat installation cost?
A thermostat is about an hour or less, so it is usually just the $159 service call.
Will a smart thermostat work with my system?
Most do. Check the brand’s compatibility tool before you buy, or send us a photo of the wiring behind your current thermostat and we’ll help.
How much does fixture installation cost in San Diego?
Switch Your Fixture charges a $159 service call that includes the first hour of labor. Additional labor is $159 per hour, billed in 15-minute increments of $39.75. Every service is billed at the same rate, so you can add up the time for your fixtures and multiply by the hourly rate to build your own estimate.
What happens if my fixture takes less than, or more than, an hour to install?
Our service call includes an hour of labor to install your fixture. If it takes less than an hour, we offer other services to fill the time, such as changing bulbs, swapping switch plates or hanging a picture. Additional labor is billed in 15-minute increments at our hourly rate.
What if the fixture I bought doesn’t fit?
If we arrive and your fixture doesn’t fit, we only charge a 15-minute consultation fee ($39.75). The consultation gives you the information you need to buy the correct fixture, and we rebook your install.
Can you install multiple fixtures on the same visit?
Yes, that’s what we do. Every fixture is billed at the same rate, so put your whole list in one request: a fan, a faucet, a TV and a doorbell can all go in on the same trip under one service call.
Do you warranty your work?
Yes. We warranty all of our installations. If something we installed is not working the way it should, call or text (619) 677-8677 and we will come back and make it right.
Do you need a different kind of install?
Book it on the same visit.
Smart Thermostat Installation near you
Same $159 rate in every neighborhood
Book online 24/7
Thermostats? We’ll switch it.
Tell us what you bought and when suits you. $159 service call with the first hour included, then $39.75 per 15 minutes. Text or call a human, never a bot.
- Hours
- Mon–Fri · 8:00 AM–5:30 PM
- Based in
- San Diego, CA 92107
- Warranty
- Every installation
